Enter at least 2 characters to start the search.

HAW562
Surge arrester

HAW562 surge arrester ©Endress+Hauser
HAW562 surge arrester ©Endress+Hauser
HAW562 surge arrester ©Endress+Hauser
HAW562 surge arrester ©Endress+Hauser

Surge arrester for DIN rail according to IEC 60715

The HAW562 surge arrester is used to protect electronic components from being destroyed by overvoltage. It ensures that overvoltage surges which occur in signal cables (e.g. 4 to 20 mA), in communication lines (fieldbuses) and in power lines are safely passed into the ground. The functionality of the transmitter or the electronics component to be protected is not affected.

  • Enkla produkter

  • Enkla att välja, installera och använda

Tekniska egenskaper

Enkelhet

  • Standardprodukter

  • Pålitliga, robusta och lätta att underhålla

Tekniska egenskaper

Enkelhet

  • High-end produkter

  • Mycket funktionella och praktiska

Tekniska egenskaper

Enkelhet

  • Specialprodukter

  • Designade för krävande applikationer

Tekniska egenskaper

Enkelhet

Varierande

FLEX urvalet Tekniska egenskaper Enkelhet
  • F
  • L
  • E
  • X

Fundamental urvalet

Möt dina grundläggande mätbehov

Tekniska egenskaper
Enkelhet
  • F
  • L
  • E
  • X

Lean urvalet

Hantera dina kärnprocesser med enkelhet

Tekniska egenskaper
Enkelhet
  • F
  • L
  • E
  • X

Extended urvalet

Optimera dina processer med innovativa teknologier

Tekniska egenskaper
Enkelhet
  • F
  • L
  • E
  • X

Xpert urvalet

Hantera dina mest utmanande applikationer

Tekniska egenskaper
Enkelhet

Varierande

please wait Loading alternative products

Snabbval

Välj från de föreslagna alternativen
  • <%label%>
  • <%feature%>
  • Process Connection
  • <%message%>

eller

Individuell konfigurering

Fortsätt välja från alla tillgängliga alternativ
  • Fördelar

    • Investment intensive measuring instruments protected

    • Increased plant availability as surge arrester is perfectly matched to the electronic components involved in process automation and process measuring technology

    • Application in Ex areas - optionally...

  • Applikationsområde

    Surge arresters are used to weaken residual currents from upstream lightning protection steps and to limit system-induced or -generated overvoltage surges.

    HAW562 units are primarily used in process automation and in measuring and communication...

Funktioner och specifikationer

Tillbaka

Details

  • Mätprincip

    Surge arrester

  • Function

    Surge arrester for DIN rail mounting

    Compact device for an easy ordering (no separation of mounting module and protection module)

    Flexible integration into the measuring chains of the process industry due to approvals according to ATEX & IEC, SIL2 conformity

    compatibility with the established fieldbusses (HART, FF, PA)

    Innovative grounding concept to avoid low-frequency equalizing currents – direct and indirect shield grounding possible in one device

    Uninterruptible operation of the plant due to an automatic resetting after the discharge process

  • Certification

    SIL2 conformity


    CSA

  • Dimensions (wxhxd)

    HAW562-AAA, HAW562-AAD, HAW562-AAE, HAW562-8DA:

    12 x 90 x 72.5 mm

    (0.47" x 3.54" x 2.85")


    HAW562-AAB, HAW562-AAC:

    18 x 90 x 73 mm

    (0.71" x 3.54" x 2.87")

  • Operating Voltage

    24V/60V/230V/5V/12(80)V/24V

  • Mätprincip

    Surge arrester

  • Measuring principle

    Surge arrester for DIN rail mounting

  • Function

    Surge arresters are applied to protect electronic components of a plant against overvoltage! Due to this investment intensive measuring instruments are protected and the plant availability is increased.

  • Application

    Surge protection for power supply or signal / communication cables

  • SIL

    2

  • Certificates

    ATEX

    IECEx

    CSA

Dokumentation / manualer / programvara

Tillbehör / reservdelar

Nr
Order code
Specification