En överblick över specifikationer
-
Process temperature
-200 °C ... 200 °C
(-328 °F ... 392 °F) -
Process pressure / max. overpressure limit
1bar abs...24.5 bar abs
15 psi...355.25 psi -
Accuracy
up to ±2mm (+/- 0.08")
Applikationsområde
Float Gauge LT5 has been developed for all areas of industry. Many years of operation in a wide variety of applications have proven its reliability.
Level indication of petroleum products such as crude oil, kerosene, light and heavy oil, vegetable oil, palm oil, seed oil and animal oil, highly viscous liquid such as asphalt, certain chemicals (corrosive/toxic vapor can be sealed using a liquid seal pot).
Process temperature for low pressure version: -200 to +200°C (-328 to +392°F)
Process temperature for middle/high pressure version: -45 to +80°C (-49 to +176°F)
Measuring range: Maximum 30m (100ft)
Accuracy: ±2mm (± 0.08")
Fördelar
-
No electrical power is required to perform the measurement
-
Built-in repeatability check
-
Direct reading at the tank side allows you to check the level indication easily
-
Can be installed on a variety of tanks including fixed roof, floating roof, covered floating roof and spherical tanks
-
Can be used in conjunction with analog/digital transmitter to perform tank inventory management
-
LT5 has completely integrated internal mechanisms
-
Standardized guide wire and anchor design allow easy customer installation
Xpert urvalet
-
Specialprodukter
- Designade för krävande applikationer
Tekniska egenskaper
Enkelhet
Varierande
-
Standardprodukter
- Pålitliga, robusta och lätta att underhålla
Tekniska egenskaper
Enkelhet
-
Specialprodukter
- Designade för krävande applikationer
Tekniska egenskaper
Enkelhet
Varierande
| FLEX urvalet | Tekniska egenskaper | Enkelhet |
|---|---|---|
Fundamental urvalet Möt dina grundläggande mätbehov |
Tekniska egenskaper
|
Enkelhet
|
Lean urvalet Hantera dina kärnprocesser med enkelhet |
Tekniska egenskaper
|
Enkelhet
|
Extended urvalet Optimera dina processer med innovativa teknologier |
Tekniska egenskaper
|
Enkelhet
|
Xpert urvalet Hantera dina mest utmanande applikationer |
Tekniska egenskaper
|
Enkelhet
Varierande |
Loading alternative products
Föregångare
Kundcase
3 dokument
-
-
Teknisk information (TI)
Float level gauge LT5
Mechanical tank gauge for measuring liquid level
EN SV 31/03/202230/01/202004/10/201817/04/201801/08/2014Språk:
Engelska
Version:
31/03/2022
Filstorlek:
1011.9 KB
Filnamn:
TI01167GEN_0622-00.pdf
-
-
-
Användarinstruktion (BA)
Float level gauge LT5
Mechanical tank gauge for measuring liquid level
EN SV 31/03/202220/12/201904/10/201817/04/201801/08/2014Språk:
Engelska
Version:
31/03/2022
Filstorlek:
1.7 MB
Filnamn:
BA01264GEN_0622-00.pdf
-
-
-
Kortfattad instruktion (KA)
KA Float level gauge LT5
Mechanical tank gauge for measuring liquid level
EN SV 06/10/2023Språk:
Engelska
Version:
06/10/2023
Filstorlek:
991.8 KB
Filnamn:
KA01676GEN_0123-00.pdf
-
Sök efter reservdelar efter nummer på ritningen
60 spare parts & accessories
60 spare parts & accessories
60 spare parts & accessories
-
Seal O shape, front cover steel/glass
RitningsnummerOrderkod2156004464 -
-
Counter cover LT5
RitningsnummerOrderkod2071269676 -
-
Blind cover set, for rear cover
RitningsnummerOrderkod2056004288 -
-
Dial plate, 2.5m
RitningsnummerOrderkod42017860-0220 -
-
Dial plate, 5m
RitningsnummerOrderkod42017860-0221 -
-
Dial plate, 10m
RitningsnummerOrderkod42017860-0222 -
-
Dial plate, 16m
RitningsnummerOrderkod42017860-0223 -
-
Dial plate, 20m
RitningsnummerOrderkod42017860-0224 -
-
M & MM pointer assy., Level, Plastic
RitningsnummerOrderkod42017860-0101 -
-
Tape guide, aluminium type
RitningsnummerOrderkod8056004502 -
-
Tape guide, aluminium type
RitningsnummerOrderkod8056004502 -
-
Conster spring, 5m
RitningsnummerOrderkod8152015582 -
-
Conster spring, 10m
RitningsnummerOrderkod81017860-5033 -
-
Conster spring, 20m (range 16m, 20m)
RitningsnummerOrderkod81017860-5035 -
-
Conster spring, 30m
RitningsnummerOrderkod81017860-5036 -
-
Bearing for tape drum
RitningsnummerOrderkod8252016945 -
-
Conster drum small, metal, 20m
RitningsnummerOrderkod84017860-0107 -
-
Conster drum small, metal, 30m
RitningsnummerOrderkod84017860-0108 -
-
Conster drum large, aluminum
RitningsnummerOrderkod84017860-0401 -
-
Conster drum large, aluminum
RitningsnummerOrderkod84017860-0401 -
-
Gear, d=97mm
RitningsnummerOrderkod85017860-0001 -
-
Indication gear assembly, 2.5m
RitningsnummerOrderkod85017860-5401 -
-
Indication gear assembly, 5m
RitningsnummerOrderkod85017860-5402 -
-
Indication gear assembly, 10m
RitningsnummerOrderkod85017860-5403 -
-
Indication gear assembly, 16m
RitningsnummerOrderkod85017860-5404 -
-
Indication gear assembly, 20m
RitningsnummerOrderkod85017860-5405 -
-
Counter unit (m/mm)
RitningsnummerOrderkod42017860-5407 -
-
Dust protector
RitningsnummerOrderkod80017860-0213 -
-
Dust protector
RitningsnummerOrderkod80017860-0213 -
-
Seal, rear cover V6502, LP
RitningsnummerOrderkod1170106017 -
-
Seal, front cover plastic LT5LP,11/12
RitningsnummerOrderkod21017860-0119 -
-
Drain plug 1/4", SUS304,LP
RitningsnummerOrderkod80017860-0056 -
-
Front cover, steel/glass, LT5 LP
RitningsnummerOrderkod2071269616 -
-
Front cover, plastic
RitningsnummerOrderkod20017860-5450 -
-
Gauge head nipple, SUS316, LT5 LP/LT11
RitningsnummerOrderkod8070106005 -
-
Crank handle device LT5, LP
RitningsnummerOrderkod9671269687 -
-
Tape guide, SUS spring type, standard
RitningsnummerOrderkod8056004503 -
-
Check unit assembly
RitningsnummerOrderkod83017860-0113 -
-
Sprocket shaft assembly
RitningsnummerOrderkod83017860-0111 -
-
Conster drum large, plastic,LT5LP, 11/12
RitningsnummerOrderkod84017860-0106 -
-
Sprocket wheel
RitningsnummerOrderkod84017860-0109 -
-
Tape drum, standard, LP
RitningsnummerOrderkod84017860-5123 -
-
Tape drum, crank unit, LP
RitningsnummerOrderkod84017860-5124 -
-
Union joint, Rc1-1/2 SUS316
RitningsnummerOrderkod80017860-5440 -
-
Gland holder
RitningsnummerOrderkod83017860-0318 -
-
O-ring, PTFE, small
RitningsnummerOrderkod83017860-0319 -
-
O-ring, PTFE, large
RitningsnummerOrderkod83017860-0320 -
-
Seal metal for check handle
RitningsnummerOrderkod83017860-0326 -
-
Oil seal
RitningsnummerOrderkod83017871-1227 -
-
Front cover, steel/glass, LT5 MP/HP
RitningsnummerOrderkod2071269625 -
-
Internal parts for Check handle, MP/HP
RitningsnummerOrderkod8371134086 -
-
Coupling, male,for gauge head, MP/HP
RitningsnummerOrderkod80017871-1232 -
-
Bearing assembly
RitningsnummerOrderkod82017860-0316 -
-
Sprocket + magnet, metric, HP, NBR (LPG)
RitningsnummerOrderkod8470106490 -
-
Sprocket + magnet, metric, HP, CR (NH3)
RitningsnummerOrderkod8470106491 -
-
Sprocket + magnet, metric, MP, NBR (LPG)
RitningsnummerOrderkod8470106492 -
-
Sprocket + magnet, metric, MP, CR (NH3)
RitningsnummerOrderkod8470106493 -
-
Tape drum, with hoist-up, MP/HP
RitningsnummerOrderkod8470106495 -
-
Tape drum, w/o hoist up, MP/HP
RitningsnummerOrderkod8470106622 -
-
Gland tightening tool
RitningsnummerOrderkod95017860-0004 -
-
Crank-up handle device LT5, MP
RitningsnummerOrderkod9671269672 -
-
Check shaft, short, MP
RitningsnummerOrderkod8356004299 -
-
Magnet cover, short, MP
RitningsnummerOrderkod8456004407 -
-
Crank-up handle device LT5, HP
RitningsnummerOrderkod9671269722 -
-
Check shaft assembly set, long, HP
RitningsnummerOrderkod83017860-0322 -
-
Magnet cover, long, HP
RitningsnummerOrderkod84017860-0311 -
-
Measuring tape, CRT 5m (total L 13m)
RitningsnummerOrderkod8656004412 -
-
Measuring tape FRT 5m (L 7m) + wire 9m
RitningsnummerOrderkod86017860-0005 -
-
Meas. tape FRT 5m(L7m)+PFA coat wire 11m
RitningsnummerOrderkod86017860-0006 -
-
Meas. tape FRT 10m(total L 12m)+wire 14m
RitningsnummerOrderkod86017860-0007 -
-
Meas. tape FRT 10m(L12m)+PFAcoatwire 16m
RitningsnummerOrderkod86017860-0008 -
-
Meas. tape FRT 20m (L 22m)+ wire 24m
RitningsnummerOrderkod86017860-0011 -
-
Meas. tape FRT 20m(L22m)+PFAcoatwire 26m
RitningsnummerOrderkod86017860-0012 -
-
Meas. tape FRT 30m(total L 32m)+wire 34m
RitningsnummerOrderkod86017860-0013 -
-
Meas. tape FRT 30m,1.6mm 316 PTFE coated
RitningsnummerOrderkod86017860-0014 -
-
Measuring tape, BT 30m (total L 75m)
RitningsnummerOrderkod86017860-5210 -
-
Measuring tape, CRT 10m/BT 5m (L 24m)
RitningsnummerOrderkod86017860-5302 -
-
Measuring tape, CRT 20m/BT 16m (L 45m)
RitningsnummerOrderkod86017860-5304 -
-
Measuring tape, CRT 30m/BT 20m (L 65m)
RitningsnummerOrderkod86017860-5305 -
-
Measuring tape, FRT 5m (L 7m), tape only
RitningsnummerOrderkod86017860-5306 -
-
Measuring tape, FRT 10m(L12m), tape only
RitningsnummerOrderkod86017860-5307 -
-
Measuring tape, FRT 20m(L 22m),tape only
RitningsnummerOrderkod86017860-5309 -
-
Universal joint
RitningsnummerOrderkod86017860-0210 -
-
Triangle joint
RitningsnummerOrderkod86017860-0211 -
-
Float LF400, SUS316, 5kg, LP
RitningsnummerOrderkod88017860-7003 -
-
Float LF140, PVC, 2.1kg, w/o ring
RitningsnummerOrderkod8856004367 -
-
Float LF140, PVC, 2.4kg, w/o ring
RitningsnummerOrderkod8856004368 -
-
Float LF140, 316, 2.1kg, w/o ring
RitningsnummerOrderkod8856004369 -
-
Float LF140, 316, 2.4kg, w/o ring
RitningsnummerOrderkod8856004370 -
-
Float LF400, SUS316, 8kg, LP
RitningsnummerOrderkod88017860-7010 -
-
Float HF400, SUS316, 8.3kg, MP/HP
RitningsnummerOrderkod88017860-7001 -
-
Seal, elbow, low pressure, V6502
RitningsnummerOrderkod10170106015 -
-
O-ring, bearing, P8, silicon rubber, LP
RitningsnummerOrderkod101017860-0709 -
-
SUS316 bearing, with o-ring 2 piece, LP
RitningsnummerOrderkod102017860-1259 -
-
90' Sh.elbow ASME 1-1/2"Cl.150 RF Al.,LP
RitningsnummerOrderkod104017860-0018 -
-
90' Sh.elbow Rp 1-1/2" SCS14, LP
RitningsnummerOrderkod104017860-0482 -
-
90' Sheave elbow Rp 1-1/2 aluminum, LP
RitningsnummerOrderkod104017860-5445 -
-
Seal, elbow SCS14 low pressure V6502
RitningsnummerOrderkod10170106014 -
-
SUS316L elbow roller, LP/MP
RitningsnummerOrderkod103017860-0704 -
-
O-ring, bearing, PTFE, P10, HP
RitningsnummerOrderkod101017860-0707 -
-
SUS316 bearing with 2 o-rings, HP
RitningsnummerOrderkod102017860-0706 -
-
SUS304 elbow roller, HP
RitningsnummerOrderkod103017860-0705 -
-
90’ Sh.elb ASME 1-1/2" Cl.300 RF iron HP
RitningsnummerOrderkod104017860-0020 -
-
135'Sh.elb ASME 1-1/2"Cl.300 RF iron HP
RitningsnummerOrderkod104017860-0022 -
-
Washer, T-anchor, 10K/20K/150lbs, SUS316
RitningsnummerOrderkod9170106494 -
-
Washer, T-anchor, Cl.300, SUS316
RitningsnummerOrderkod91017860-5333 -
-
Seal, top anchor, JIS 10K, V6502
RitningsnummerOrderkod9170106003 -
-
Shaft, top-anchor, SUS316
RitningsnummerOrderkod93017860-0808 -
-
Top-anchor, SUS316, socket weld-fix, LP
RitningsnummerOrderkod94017860-0058 -
-
Seal T-anchor (Alu housing),thread,V6502
RitningsnummerOrderkod9171269669 -
-
Seal, top anchor, thread, V6502
RitningsnummerOrderkod9170106010 -
-
Housing Cap, Aluminum, 1" threaded
RitningsnummerOrderkod92017860-0030 -
-
T-anchor ASME 1-1/2" Cl.150 RF alumi, LP
RitningsnummerOrderkod94017860-0025 -
-
T-anchor ASME 1-1/2" Cl.150 RF SUS316,LP
RitningsnummerOrderkod94017860-0026 -
-
T-anchor ASME 1-1/2" Cl.300 RF iron HP
RitningsnummerOrderkod94017860-0027 -
-
Top anchor SUS316 threaded, PT1"
RitningsnummerOrderkod94017860-0820 -
-
Top-anchor R1 aluminum (ADC6), LP
RitningsnummerOrderkod94017860-5471 -
-
Teflon part assembly
-
Ventil
RitningsnummerOrderkod111017860-0663 -
-
Handle assembly
-
Ventil
RitningsnummerOrderkod112017860-5117 -
-
Valve SCS13 ASME 1-1/2" Cl.150 RF
-
Ventil
RitningsnummerOrderkod113017860-0033 -
-
Valve SCS13 ASME 1-1/2" Cl.300 RF
-
Ventil
RitningsnummerOrderkod113017860-0034 -
-
Measuring tape, FRT 30m(L 32m),tape only
RitningsnummerOrderkod86017860-5310 -
-
Measuring wire, 316, 5m
RitningsnummerOrderkod86017860-5501 -
-
Measuring wire, 316, 10m
RitningsnummerOrderkod86017860-5502 -
-
Measuring wire, 316, 16m
RitningsnummerOrderkod86017860-5503 -
-
Measuring wire, 316, 20m
RitningsnummerOrderkod86017860-5504 -
-
Measuring wire, 316, 30m
RitningsnummerOrderkod86017860-5505 -
-
Measuring wire, PFA coated, 5m
RitningsnummerOrderkod86017860-5506 -
-
Measuring wire, PFA coated, 10m
RitningsnummerOrderkod86017860-5507 -
-
Measuring wire, PFA coated, 16m
RitningsnummerOrderkod86017860-5508 -
-
Measuring wire, PFA coated, 20m
RitningsnummerOrderkod86017860-5509 -
-
Measuring wire, PFA coated, 30m
RitningsnummerOrderkod86017860-5510 -
-
Tape clamp
RitningsnummerOrderkod86017860-5430 -
-
Wire connector, triangle
RitningsnummerOrderkod86017860-5432 -
-
Bearing x2, > seal pot, elbow roller
RitningsnummerOrderkod10571134091 -
-
Sealpot, elbow roller, PVC
RitningsnummerOrderkod10671134090 -
-
Oil gauge KL60
RitningsnummerOrderkod107017860-0720 -
-
Seal liquid, parafin, 2 liter
RitningsnummerOrderkod107017860-5452 -
-
Seal pot PVC/PVC, JIS 10K 40A FF
RitningsnummerOrderkod10852017100 -
-
Seal pot SGP/AC4A, Rp 1-1/2"
RitningsnummerOrderkod10852017103 -
-
Seal pot SGP/AC4A, JIS 10K 40A RF
RitningsnummerOrderkod10852017104 -
-
Seal pot 316/316, Rp 1-1/2"
RitningsnummerOrderkod10852017110 -
-
Seal pot 316/316, JIS 10K 40A RF
RitningsnummerOrderkod10852017111 -
-
Cover elbow Alu, packing, plug
RitningsnummerOrderkod10156004354 -
-
Guide wire, strand, SUS316, 12m x 2
RitningsnummerOrderkod8771134089 -
-
Guide wire, strand, PFA coated, 24m
RitningsnummerOrderkod87017860-0047 -
-
Guide wire, strand, PFA coated, 36m
RitningsnummerOrderkod87017860-0048 -
-
Guide wire, strand, PFA coated, 44m
RitningsnummerOrderkod87017860-0049 -
-
Guide wire, strand, PFA coated, 64m
RitningsnummerOrderkod87017860-0050 -
-
Guide wire, strand, PFA coated, 14m
RitningsnummerOrderkod87017860-5464 -
-
Guide wire, strand, SUS316, 14m
RitningsnummerOrderkod87017860-5516 -
-
Guide wire, strand, SUS316, 24m
RitningsnummerOrderkod87017860-5517 -
-
Guide wire, strand, SUS316, 36m
RitningsnummerOrderkod87017860-5518 -
-
Guide wire, strand, SUS316, 44m
RitningsnummerOrderkod87017860-5519 -
-
Guide wire, strand, SUS316, 64m
RitningsnummerOrderkod87017860-5520 -
-
Guide wire, solid, SUS316, 7m x 2
RitningsnummerOrderkod87017860-5521 -
-
Guide wire, solid, SUS316, 12m x 2
RitningsnummerOrderkod87017860-5522 -
-
Guide wire, solid, SUS316, 18m x 2
RitningsnummerOrderkod87017860-5523 -
-
Guide wire, solid, SUS316, 22m x 2
RitningsnummerOrderkod87017860-5524 -
-
Guide wire, solid, SUS316, 32m x 2
RitningsnummerOrderkod87017860-5525 -
-
Anchor hook SS400, bolt, nut PVC
RitningsnummerOrderkod8752016949 -
-
Anchor hook SUS316, bolt, nut PVC
RitningsnummerOrderkod8752016951 -
-
Anchor hook SS400, bolt, nut SUS316L
RitningsnummerOrderkod87017860-5441 -
-
Anchor hook SUS316, bolt, nut SUS316L
RitningsnummerOrderkod87017860-5442 -
-
Wire guide socket, FRT instal. Rc 1-1/2
RitningsnummerOrderkod80017860-0721 -
-
Gauge bracket, steel
RitningsnummerOrderkod80017860-5420 -