©Endress+Hauser
En överblick över specifikationer
Process temperature
PA version: max. 80 °C (max. 176 °F)
Process pressure
PA pressure cylinder: max. 6 bar (87 psi)
Applikationsområde
The Cleanfit CPA474 retractable assembly is designed for applications which require safe separation from the process and contain media that could affect stainless steel. It offers highest operating comfort: You can replace sensors and even service the assembly while the process is running. The optional electric or pneumatic control system enables automated cleaning and calibration even in difficult processes.
Cleanfit CPA474 is intended for use in tanks and pipes in:
It is suitable to be used with pressures of up to 10 bar (stainless steel cylinder) or 6 bar (PA cylinder).
Fördelar
Safe and reliable separation from the process by ball valve, even under harsh conditions
Suitable for corrosive media: Only polymers (PP, PVDF, PEEK) in contact with medium
No process interruption for electrode cleaning and calibration – saves maintenance time and costs
Extended operating life of electrodes due to automatic cleaning
Flexible adaptation to all applications by great variety of materials and process connections
Kundcase
Measurable and testable: Monitoring with Teqwave
Efficient component cleaning is an important part of the production of industrially manufactured components. Borer Chemie AG therefore relies on the concentration measurement with Teqwave F, I and T.
Läs hela berättelsen
Liquid analysis in LNG trains
The various process steps in a gas liquefaction plant must comply with different limit values. Our products are ideally suited for these processes.
Läs hela berättelsen
Improved thickener operation at Minera Valle Central
The measurement of interface in thickeners is done manually, while the turbidity measurement is done by obtaining samples sent to the laboratory. With Endress+Hauser there is an automated solution.
Läs hela berättelsen
Enkla produkter
Enkla att välja, installera och använda
Tekniska egenskaper
Enkelhet
Standardprodukter
Pålitliga, robusta och lätta att underhålla
Tekniska egenskaper
Enkelhet
High-end produkter
Mycket funktionella och praktiska
Tekniska egenskaper
Enkelhet
Specialprodukter
Designade för krävande applikationer
Tekniska egenskaper
Enkelhet
FLEX urvalet
Tekniska egenskaper
Enkelhet
Fundamental urvalet
Möt dina grundläggande mätbehov
Tekniska egenskaper
Enkelhet
Lean urvalet
Hantera dina kärnprocesser med enkelhet
Tekniska egenskaper
Enkelhet
Extended urvalet
Optimera dina processer med innovativa teknologier
Tekniska egenskaper
Enkelhet
Xpert urvalet
Hantera dina mest utmanande applikationer
Tekniska egenskaper
Enkelhet
Det här kanske också intresserar dig
Om oss
Utan armatur – ingen mätning!
Säkerheten och enkelheten att hantera en analytisk mätpunkt börjar med rätt armatur. Vår flexibla armaturproduktion säkerställer att du får rätt armatur för dina behov.
Mer information
Application
Chemical industry, wastewater, industrial water, power plants, refuse incinerators
Installation
Retractable assembly with ball valve
Characteristic
Open and closed tank, piping (min. DN80)
Design
Manual or pneumatic
Material
Seals: EPDM / FPM / perfluoroelastomer
Dimension
Immersion depth: 71 to 207 mm
Process temperature
PA version: max. 80 °C (max. 176 °F)
Process pressure
PA pressure cylinder: max. 6 bar (87 psi)
Connection
Process connection DN50, ANSI 2"
Additional certifications
Inspection certificate 3.1 acc. to EN 10204 on demand
Application
Chemical industry, wastewater, industrial water, power plants, refuse incinerators
Installation
Retractable holder with ball valve
Characteristic
Open and closed tank, piping (min. DN80)
Design
Manual or pneumatic
Material
Seals: EPDM / FPM / perfluoroelastomer
Dimension
Immersion depth: 71 to 207 mm (2.8 to 8.15 inch)
Process temperature
PA version: max. 80 °C (max. 176 °F)
Process pressure
PA pressure cylinder: max. 6 bar (87 psi)
Connection
Process connection DN50, ANSI 2"
Mest nedladdade
Technical Information Retractable Assembly Cleanfit CPA474
Engelsk version - 04/2010
Retractable process assembly with ball valve, for pH and ORP electrodes
EN
SV
DE FR IT PL RU ZH
01/04/2010
01/02/2005
01/09/2003
01/10/2002
Språk:
Engelska
Version:
01/04/2010
Filstorlek:
1009.5 KB
Filnamn:
TI345CEN_0410.pdf
SD CleanFit Servicekits / Spare part kits
Engelsk version - 07/2003
CleanFit Wechselarmaturen / Retractable assemblies
Språk:
Engelska
Version:
01/07/2003
Filstorlek:
1.6 MB
Filnamn:
Sd096ca2.pdf
9 dokument
Technical Information Retractable Assembly Cleanfit CPA474
Retractable process assembly with ball valve, for pH and ORP electrodes
EN
SV
Tyska French Italienska Polska Ryska Kinesiska
01/04/2010
01/02/2005
01/09/2003
01/10/2002
Språk:
Engelska
Version:
01/04/2010
Filstorlek:
1009.5 KB
Filnamn:
TI345CEN_0410.pdf
Technical Information Topcal S CPC310
Fully automatic measuring, cleaningand calibration system in hazardous
EN
SV
Tyska French Italienska Polska Ryska
22/07/2015
01/07/2006
Språk:
Engelska
Version:
22/07/2015
Filstorlek:
2 MB
Filnamn:
TI00404CEN_1315.pdf
Operating Instructions Cleanfit CPA474
Retractable process assembly with ball valve for pH and redox sensors
EN
SV
Tyska French Italienska Polska Ryska
01/04/2010
01/05/2005
01/02/2005
01/01/2004
01/09/2003
Språk:
Engelska
Version:
01/04/2010
Filstorlek:
2.2 MB
Filnamn:
BA345CEN_0410.pdf
SD CleanFit Servicekits / Spare part kits
CleanFit Wechselarmaturen / Retractable assemblies
Språk:
Engelska
Version:
01/07/2003
Filstorlek:
1.6 MB
Filnamn:
Sd096ca2.pdf
pH measurement in industrial processes
Selection and engineering guide for different industries and
Språk:
Engelska
Version:
02/12/2021
Filstorlek:
3.2 MB
Filnamn:
CP00010CEN_1621_pH selection guide_2021.pdf
さまざまな産業およびアプリケーション向けのpH測定セレクションガイド
Språk:
Japanska
Version:
08/02/2024
Filstorlek:
5.8 MB
Filnamn:
pH selection guide_CP00010C.pdf
pH-Messung in Industrieprozessen
Auswahl- und Engineering-Hilfe für verschiedene Industriebranchen und
Språk:
Tyska
Version:
01/12/2021
Filstorlek:
3.3 MB
Filnamn:
CP00010CDE_1621_pH Auswahlhilfe_2021.pdf
Product family: CleanFit P
Product root: CPA473-, CPA474-
Språk:
Engelska
Version:
14/08/2020
Filstorlek:
191.8 KB
Filnamn:
CPA47x_HE Ex_HE_01323_01.20.pdf
Product family: CleanFit P
Product root: CPA474-
Språk:
Engelska
Version:
23/09/2020
Filstorlek:
209.2 KB
Filnamn:
Klassifizierungsbescheinigung nach DGRL für CPA474.pdf
60 spare parts & accessories
60 spare parts & accessories
60 spare parts & accessories
KIT CPA474 Electrode guide PP short
KIT CPA474 electrode guide PVDF short
KIT CPA474 electrode guide PEEK short
KIT CPA474 electrode guide PP long
Kit CPA474 electrode guide PVDF long
KIT CPA474 electrode guide PEEK long
KIT CPA47x:stop bolt with handle (1 pc.)
KIT CPA473/474 cylinder PA short
KIT CPA473/474 cylinder PA long
KIT CPA471 long+474 short: Cylinder SS
KIT CPA473/474 cylinder 1.4404 long
KIT CPA47x pneu.connection G1/8 AD6 10p
KIT CPA47X: Throttel check valve
Kit CPA474 rinsing chamber PP
Kit CPA474 rinsing chamber PVDF
Kit CPA474 rinsing chamber PEEK
Kit CPA474 PP press proof ,rins. chamber
Kit CPA474 PVDF pr.proof, rins. chamber
Kit CPA474 PEEK pr. proof, rins. chamber
KIT CPA474 PP-EPDM, ball valve
KIT CPA474 ball valve PP-VITON
KIT CPA474 PP-FFKM, ball valve
KIT CPA474 PVDF-EPDM, ball valve
KIT CPA474 PVDF-VITON, ball valve
KIT CPA474 PVDF-FFKM, ball valve
KIT CPA474 Actuation pneumatic complete
KIT CPA474 Actuation pneum. compl. el.
Kit CPA47: intermediate flange ball valv
Kit CPA473/474: Connection block pneumat
Pneum. proxim. switches f.retrofitting
KIT CPA473/474: Electr. proxim.switches
Outlet valve manual CPA473/474 G1/4"
Outlet valve manual CPA473/474 NPT1/4"
Outlet valve pneumatic CPA474 G1/4"
Outlet valve pneumatic CPA474 NPT1/4"
Kit CPA47x Outlet valve: O-rings Viton
Check valve CPA473/474 G1/4"
Check valve CPA473/474 NPT1/4"
KIT CPA474 rinse connectors 1/4" PVDF
KIT CPA474, rinse connectors NPT1/4"
KIT CPA471/472 shaft pneum long
KIT CPA471/472 lift tube gel hand long
KIT CPA473/474 pneum. re.pipe gel 360mm
KIT CPA473/474 manual, re.pipe gel 360mm
Kit CPA473, KCI pipe pneumatic
Kit CPA473 KCl-pipe manual
Splash protection cap for assemblies
CPA471...5 all seals w/o medium contact
O-Ring set EPDM for CPA474
O-Ring set Kalrez for CPA474
Kit CPA471 EPDM w/o scraper: sleeve
Kit CPA471 Viton w/o scraper: sleeve
Kit CPA471 Kalrez w/o scraper: sleeve
Kit CPA474 DN50 PVDF: Raised face
Kit CPA474 DN50 PEEK: Raised face
Kit CPA474 DN50 PP: Raised face
Kit CPA474 ANSI 2" PVDF: Raised face
Kit CPA474 ANSI 2" PEEK: Raised face
Kit CPA474 ANSI 2" PP: Raised face
Kit CPA47: Flange DN50 1.4404 (316L)
Kit CPA47: Flange ANSI 2" 1.4404 (316L)
Kit CPA472D-KCl: Exit air seal bush PVDF
Spare parts CPA871, all materials
Kit Sensor output interface
Vi värdesätter din integritet
Vi använder cookies för att förbättra din användarupplevelse, samla in statistik för att optimera webbplatsens funktionalitet och leverera skräddarsydda annonser eller innehåll.
Välj "Acceptera alla", för att samtycka till vår användning av cookies.Cookie Policy .
Anpassa
Acceptera endast det väsentliga
Acceptera alla
