En överblick över specifikationer
-
Process temperature
max. 50°C
(max. 122°F) -
Process pressure
max. 6bar
(max.87psi)
Applikationsområde
Flowfit COA250 is a flow assembly for wall mounting or unsupported installation in pipes and is the ideal solution wherever sensor immersion is either impossible or undesirable. Its design speeds up sensor response and allows easy accessibility to the sensor for calibration in the air. Insensitive to clogging, it provides automatic self-venting ensuring reliable measured values at all times. Better still, with the automatic cleaning nozzle, you'll benefit from extended maintenance intervals.
Flowfit COA250 is a flow assembly for oxygen sensors with a diameter of 40mm in:
Wastewater treatment plants:
- Process water treatment and monitoring
- Effluent water monitoringDrinking and process water:
- Process water treatment and monitoring
- Water quality monitoring in rivers, lakes or seasUtilities of all industries:
- Process water treatment and monitoring
- Cooling water monitoring
Fördelar
Flexible mounting options: Suitable for wall mounting or unsupported pipe installation.
Fast measuring values: Low assembly volume shortens sensor response times.
Easy and safe maintenance: Automatic sensor cleaning without process interrupt.
Optimized sensor accessibility: Easy sensor removal for calibration in the air.
Fast availability: Automatic de-aeration thanks to bottom inlet/top outlet design.
Robust design: Suitable for process pressures up to 6 bar (87 psi).
Kundcase
-
Standardprodukter
- Pålitliga, robusta och lätta att underhålla
Tekniska egenskaper
Enkelhet
-
Specialprodukter
- Designade för krävande applikationer
Tekniska egenskaper
Enkelhet
Varierande
| FLEX urvalet | Tekniska egenskaper | Enkelhet |
|---|---|---|
Fundamental urvalet Möt dina grundläggande mätbehov |
Tekniska egenskaper
|
Enkelhet
|
Lean urvalet Hantera dina kärnprocesser med enkelhet |
Tekniska egenskaper
|
Enkelhet
|
Extended urvalet Optimera dina processer med innovativa teknologier |
Tekniska egenskaper
|
Enkelhet
|
Xpert urvalet Hantera dina mest utmanande applikationer |
Tekniska egenskaper
|
Enkelhet
Varierande |
-
-
Teknisk information (TI)
Flow Assembly for O2 Measurement FlowFit W COA 250
Assembly for unsupported installation in pipes or wall mounting
EN SV 01/03/200701/10/200101/09/1997Språk:
Engelska
Version:
01/03/2007
Filstorlek:
443.4 KB
Filnamn:
TI111CEN.PDF
-
-
-
Användarinstruktion (BA)
Operating instructions COA250
Flow assembly for oxygen sensors
EN SV 28/02/200731/12/2003Språk:
Engelska
Version:
28/02/2007
Filstorlek:
532.9 KB
Filnamn:
BA111CEN.pdf
-
-
-
Tillverkarförsäkran
Product family: FlowFit W
Product root: COA250-
Declaration number: HE_01033_01.18
Manufacturer specification: RoHSEN SV 04/09/2018Språk:
Engelska
Version:
04/09/2018
Filstorlek:
88.8 KB
Filnamn:
HE_01033_01.18.pdf
-