
En överblick över specifikationer
-
Ambient temperature range
+5 °C ... +35 °C
Temperature change maximum ±10 °C/h
With cooling device +5 °C ... +45 °C
Temperature change ±10 °C/h maximum; other temperatures on request -
Process temperature
≤ +1,300 °C
Depending on sampling probe -
Process pressure
800 hPa ... 1,200 hPa
Applikationsområde
The MCS300P HW is a hot/wet extractive analyzer system for measuring gases. It detects IR- or VIS-active components with variable measuring ranges for monitoring and regulating combustion processes and exhaust gas purification systems. The heated system components prevent the water and acid dew points from being undercut. This results in low maintenance requirements, high reliability and long-term system stability, even under rough and difficult
application conditions.
Monitoring of flue gas conditioning in waste or sewage sludge incinerators
Monitoring of the scrubber in flue gas conditioning
Measurement directly at the kiln inlet in cement plants
Device properties:
Simultaneous measurement of up to 6 components plus O2
Temperature of the system components up to 200 °C
Automated sample point switching for up to 3 sample points
Automated adjustment to the zero and reference point
Integrated adjustment of the device without test gas
Flexible I/O module system
Fördelar
Economic, automatic adjustment without expensive test gases
Easy remote control by integration in existing networks
Automatic control of the complete measuring system and probe
Low maintenance and reliable due to hot measurement
In combination with probe SCP3000 also for measurements at high dust loads and high temperatures
Short response time due to high sample gas flow
Xpert urvalet
-
Specialprodukter
- Designade för krävande applikationer
Tekniska egenskaper
Enkelhet
Varierande

-
Standardprodukter
- Pålitliga, robusta och lätta att underhålla
Tekniska egenskaper
Enkelhet
-
Specialprodukter
- Designade för krävande applikationer
Tekniska egenskaper
Enkelhet
Varierande
FLEX urvalet | Tekniska egenskaper | Enkelhet |
---|---|---|
Fundamental urvalet Möt dina grundläggande mätbehov |
Tekniska egenskaper
|
Enkelhet
|
Lean urvalet Hantera dina kärnprocesser med enkelhet |
Tekniska egenskaper
|
Enkelhet
|
Extended urvalet Optimera dina processer med innovativa teknologier |
Tekniska egenskaper
|
Enkelhet
|
Xpert urvalet Hantera dina mest utmanande applikationer |
Tekniska egenskaper
|
Enkelhet
Varierande |
-
Mätprincip
Interference filter correlation, Gas filter correlation
-
Measured variables
CO, CO2, HCl, H2O, NH3, NO, NO2, N2O, SO2, O2
-
Measuring range
CO: 0 ... 800 ppm / 0 ... 5 Vol.-%
CO2: 0 ... 20 Vol.-% / 0 ... 100 Vol.-%
HCl: 0 ... 700 ppm / 0 ... 12,000 ppm
H2O: 0 ... 1 Vol.-% / 0 ... 60 Vol.-%
NH3: 0 ... 550 ppm / 0 ... 5,000 ppm
NO: 0 ... 750 ppm / 0 ... 15,000 ppm
NO2: 0 ... 500 ppm / 0 ... 4,000 ppm
N2O: 0 ... 500 ppm / 0 ... 7,500 ppm
O2: 0 ... 1 Vol.-% / 0 ... 21 Vol.-%
SO2: 0 ... 200 ppm / 0 ... 10 Vol.-%
Other measuring ranges and components on request
2 measuring ranges per component -
Ambient temperature range
+5 °C ... +35 °C
Temperature change maximum ±10 °C/h
With cooling device +5 °C ... +45 °C
Temperature change ±10 °C/h maximum; other temperatures on request -
Ambient humidity
≤ 80 %
Non-condensing -
Process pressure
800 hPa ... 1,200 hPa
-
Process temperature
≤ +1,300 °C
Depending on sampling probe -
Degree of protection
IP43
-
Product safety
CE
-
-
Användarinstruktion (BA)
SFU
-
Användarinstruktion (BA)
Engelsk version - 01/2025Gas Sampling Unit
EN SV 01/01/2025Språk:
Engelska
Version:
01/01/2025
Filstorlek:
2.6 MB
Filnamn:
8029819_YJ80_OI_SFU_IP23_en_V3-0_2015-08_EHS.pdf
-
-
-
Användarinstruktion (BA)
SFU weatherproof enclosure
-
Användarinstruktion (BA)
Engelsk version - 01/2025Gas Sampling Unit with Weatherproof Enclosure
EN SV 01/01/2025Språk:
Engelska
Version:
01/01/2025
Filstorlek:
2.6 MB
Filnamn:
8029817_14SF_OI_SFU_IP54_en_V1-1_2019-07_EHS.pdf
-
-
-
Kompetensbroschyr (CP)
Emission Monitoring Solutions – broad instrument portfolio and longstanding experience
-
Kompetensbroschyr (CP)
Engelsk version - 01/2025An overview brochure about emission monitoring, their measuring
principles and technologies, global requirements and services, a
selection guide and the measuring devices at a glanceSpråk:
Engelska
Version:
01/01/2025
Filstorlek:
4.5 MB
Filnamn:
8029975_CP_Emission_Monitoring_Solutions_en_V3-0_2025.01_EHS.pdf
-
-
-
Innovation (IN)
Shelter Solutions – space and protection for measurement and analysis technology
-
Innovation (IN)
Engelsk version - 01/2025Shelter solutions are primarily used to protect the installed analyzer systems from extreme ambient conditions such as heat, cold,
dust, wind, earthquakes and corrosive or explosive atmospheresSpråk:
Engelska
Version:
01/01/2025
Filstorlek:
4.9 MB
Filnamn:
8030010_IN_Shelter_Solutions_en_V1-0_2025.01_EHS.pdf
-
-
-
Innovation (IN)
MCS300P HW – hot/wet extractive analyzer system for process gas measurements
-
Innovation (IN)
Engelsk version - 01/2025The MCS300P HW is a hot/wet extractive analyzer system for measuring process gases.
Språk:
Engelska
Version:
01/01/2025
Filstorlek:
2.1 MB
Filnamn:
8030618_IN_MCS300P HW_en_V1-0_2025.01_EHS.pdf
-
-
-
Verifiering DTM
MCS300P HW SDD file
-
Verifiering DTM
Version - YWC3SOPAS device description file for MCS300P HW
Språk:
Language neutral
Version:
13/04/2018
Filstorlek:
16 MB
Filnamn:
MCS300P HW SDD file
-
Välj från de föreslagna alternativen
-
-- selected coding-- selected label99.999,00<%label%>
-
Looking for more options? Please use the individuella konfiguratorn för att fortsätta.
-
-- selected coding-- selected label99.999,00<%feature%>
-
<%label%>99.999,00
-
Letar du efter fler tillval? Använd den individuella konfiguratorn för att fortsätta.
-
Process Connection
-
<%label%>99.999,00
-
<%label%>99.999,00
-
-
<%feature%><%coding%><%label%>
- CAD-ritningar CAD-ritningar
- CAD-ritningar
-
Pris per del
-
<%range%><%price%>
-
- Valbara tillägg