Analog pH sensor
Ceraliquid CPS41

Ceraliquid CPS41 - Analog pH sensor with refillable liquid KCl electrolyte ©Endress+Hauser

The pH-value of a liquid can be calculated using the potentiometric measurement principle. This video shows what it is about and how this measuring principle works.

Glass electrode for applications with fast-changing medium compositions or low conductivity

Ceraliquid CPS41 is the analog high performer for pH measurement in harsh chemical applications and media with low conductivity or a considerable content of organic solvents. The sensor is designed for fast response guaranteeing you high process safety even in applications with quickly changing medium compositions.

  • Fördelar

    • Resistant to poisoning due to constant refilling of KCl bridge electrolyte and separate reference lead

    • Applicable at very low conductivities (= 0.1 µS/cm) thanks to liquid KCl electrolyte

    • Suitable for cleaning in place (CIP) and sterilization in place (SIP)

    • Perfectly suited for quickly changing media: Combination of liquid...

  • Applikationsområde

    Media with very low conductivities or a considerable amount of organic solvents or alcohols and fast changing media:

    • Chemical industry

    • Power plants, e.g. boiler feed water

    • Life sciences, e.g. water for injection

    With ATEX, FM and CSA approval for use in...

Funktioner och specifikationer

Tillbaka

Details

  • Mätprincip

    Glass electrode

  • Application

    - special applications with high requirements with regard to accuracy and speed - rapid changing composition of media, highly clogging media, low conductivities.

  • Characteristic

    - for lowest conductivity - diaphragm with defined electrolyte flow - can be subject to pressure to prevent clogging - gel-free refillable electrolyte - fast response time

  • Measurement range

    pH 0-14

  • Measuring principle

    liquid-KCl with ceramic diaphragm

  • Design

    - all shaft lengths with temperature sensor.

  • Material

    glass / ceramic

  • Dimension

    Diameter: 12mm (0.46 inch) shaft length: 120, 225, 360 and 425 mm
    (4.68, 8.77, 14.04 and 16,57 inch)

  • Process temperature

    max. 135°C (274°F)

  • Process pressure

    max. 10bar (145psi)

  • Temperature sensor

    Optional with integrated Pt100

  • Ex certification

    Simple operational equipment, no certification necessary.

  • Connection

    TOP68 connection head

  • Ingres protection

    IP 68

  • Additional certifications

    3A

Dokumentation / manualer / programvara

Tillbehör / reservdelar

Nr
Order code
Specification