Endress+Hauser-koncernen

Mediacenter

Event

En karriär hos Endress+Hauser

Support

Online Shop

Ange dina personliga inloggningsuppgifter för att komma till online-shoppen och lägg din order när som helst, dygnet runt. Här hittar du också prisuppgifter och leveranstider och kan skicka offertförfrågningar.

Online Shop

E-direct Shop

E-direct - Beställ förkonfigurerade fältinstrument och systemkomponenter snabbt och enkelt online.

E-direct Shop

Vibronic
Point level detection
Liquiphant FTL85

Coated point level switch for liquids for FailSafe overfill prevention

  • Liquiphant FailSafe FTL85 ©Endress+Hauser
  • Vibronic measuring principle

  • Functional safety SIL in process instrumentation

  • Liquiphant with permanent function check is the safe choice for point level detection in liquids

Liquiphant FTL85 is a coated point level switch for use in hazardous areas with all international certificates. FailSafe overfill prevention in applications with functional safety up to SIL3 with one device. With high corrosion-resistant coating made of enamel, ECTFE and various PFA materials. Reliable measurement values, not affected by: changing media properties, flow, turbulences, gas bubbles, foam, vibrations or build-up.

Fördelar

  • Use in safety systems requiring functional safety to SIL3 in accordance with IEC 61508 Ed.2.0/ IEC 61511-1/ISA 84-1 and DIN EN ISO 13849

  • Proof test: proof testing interval up to 12 years, Slave devices tested at the press of a button

  • Permanent self-monitoring/internal redundancy

  • 4-20mA interface (acc. to NAMUR NE 06/NE 43): easy integration via the switching unit (Nivotester FailSafe FTL825) with a two-channel output (safety contacts) and locking function or direct integration into a safety PLC

  • No adjustment: quick, low-cost startup

  • No mechanically moving parts: no maintenance, no wear, long operating life

  • Monitoring of fork for damage, corrosion, buildup and mechanical blocking

Applikationsområde

Point level switch for liquids up to SIL3.

  • Process connections: Threads and flanges

  • Temperature: -50 to +150°C (-76 to +300°F)

  • Pressure: -1 to +40bar (-14.5 to +580psi)

  • Sensor length: Extension pipe up to 3m (9.8ft)

  • Sensor material: Enamel, ECTFE and various PFA materials

  • International explosion protection certificates, overfill prevention WHG, SIL

Funktioner och specifikationer

Dokumentation/manualer/programvara

Tillbehör/reservdelar

Kontakt

Endress+Hauser AB
Box 1486 171 28 Solna , Sverige
Tel.: +46 (0)8 555 116 00
Fax: +46 (0)8 555 116 55
Skicka e-post www.se.endress.com

Relaterade nyheter

Online-verktyg

Den här webbplatsen använder cookies. Genom att fortsätta använda webbplatsen godkänner du att vi använder cookies. Läs mer här Stäng